Meta tags:
description=Remote monitoring system setup: TX-RX communication, Contact ID/SIA protocol, GSM/IP/PSTN channels. Alarm Commander software, Cloud control. Complete guide.;

Headings (most frequently used words):

of, the, remote, control, what, types, software, ip, monitoring, notification, signal, receiver, alarm, commander, com, are, exp, input, does, process, device, protocol, display, signals, server, pc, ascloudmanager, outputs, expansion, line, output, benefits, application, contact, messages, system, mean, observed, transferable, receiving, incoming, kind, can, handle, how, received, with, connecting, to, digital, receivers, base, setting, cloud, advantages, web, access, voice, call, inputs, have, question, about, station, integrated, tip, ring, pgm, communication, channels, technical, data, recommended, configuration, website, modules, transmitter, io84, relay, relay3, 8io, language, pstn, controlled, serial, port, connection, in, case, direct, reception, id, triggered, by, an, state, change, interface, options, local, panel, indications, sms, command, monostabile, bistabile, oc,

Text of the page (most frequently used words):
the (218), can (69), and (64), with (38), signal (35), #device (34), control (31), for (28), #output (28), remote (27), monitoring (25), receiver (24), alarm (23), our (23), signals (21), transmitter (21), module (21), which (20), contact (19), types (18), software (18), via (18), outputs (17), depending (17), connection (17), commander (15), display (14), protocol (14), notification (14), this (14), receivers (14), line (13), from (13), case (12), server (11), communication (11), also (11), data (11), input (11), that (11), settings (10), how (10), transmission (10), modules (10), devices (10), connect (9), based (9), received (9), com (9), users (9), use (9), sia (9), what (8), incoming (8), process (8), system (8), gsm (8), type (8), set (8), security (8), network (8), receiving (7), products (7), expansion (7), relay (7), digital (7), connected (7), controlled (7), voice (7), call (7), are (7), but (7), email (7), setting (7), website (7), receive (7), port (7), has (7), does (6), communicator (6), inputs (6), number (6), must (6), sms (6), used (6), access (6), web (6), help (6), mobile (6), messages (6), remotely (6), even (6), optional (6), program (6), channel (6), hardware (5), observed (5), one (5), need (5), change (5), transmitting (5), event (5), using (5), ethernet (5), you (5), addresses (5), off (5), phone (5), quick (5), want (5), message (5), application (5), all (5), interface (5), automatic (5), reception (5), events (5), protocols (5), ports (5), telephone (5), extension (4), opportunities (4), comparison (4), table (4), recievers (4), panel (4), possible (4), service (4), sim (4), card (4), choose (4), available (4), unlimited (4), without (4), have (4), there (4), direct (4), create (4), management (4), numbers (4), about (4), address (4), status (4), information (4), test (4), directly (4), after (4), ascloudmanager (4), cloud (4), many (4), equipment (4), more (4), specified (4), enigma (4), serial (4), recommended (4), sur (4), gard (4), pstn (4), www (3), kind (3), handle (3), exp (3), value (3), pro (3), open (3), ipcom (3), signalling (3), between (3), state (3), will (3), time (3), given (3), user (3), protection (3), code (3), command (3), identification (3), registered (3), entering (3), icon (3), cid (3), appropriate (3), give (3), function (3), means (3), provide (3), push (3), wifi (3), internet (3), simple (3), options (3), only (3), another (3), cases (3), gprs (3), send (3), center (3), according (3), action (3), max (3), connecting (3), windows (3), check (3), pre (3), different (3), them (3), analogue (3), today (3), expanded (2), maximum (2), load (2), product (2), io84 (2), expand (2), collector (2), existing (2), compatible (2), enicom (2), increase (2), additional (2), external (2), controls (2), usually (2), built (2), not (2), when (2), needs (2), accordingly (2), accessed (2), operating (2), parameters (2), configure (2), electric (2), gates (2), barriers (2), other (2), each (2), separately (2), monostable (2), bistable (2), desktop (2), start (2), custom (2), notifications (2), webpage (2), sent (2), centre (2), perfect (2), requires (2), individually (2), local (2), provides (2), such (2), individual (2), world (2), benefits (2), sometimes (2), enough (2), may (2), intervene (2), acknowledge (2), activate (2), installation (2), turn (2), unique (2), immediate (2), mail (2), provided (2), pgm (2), where (2), fire (2), option (2), safety (2), handling (2), operation (2), identifier (2), object (2), changes (2), point (2), search (2), monitor (2), min (2), terms (2), recorded (2), operator (2), thanks (2), efficient (2), addition (2), 232 (2), usb (2), virtual (2), mlr2 (2), simultaneously (2), searches (2), detects (2), 9600 (2), 57600 (2), baud (2), rates (2), automatically (2), offers (2), servers (2), decode (2), asset (2), fast (2), capable (2), physical (2), channels (2), coding (2), transmit (2), technology (2), known (2), standard (2), unit (2), tools (2), necessary (2), carry (2), important (2), home (2), alarmcommander, info, ascglobal, 429, 2979, 445, 4200, procon, 8io, 24vdc, three, full, relay3, 50vdc, total, expander, second, eincom, supply, voltage, occurs, switched, until, again, bistabile, seconds, monostabile, vary, providing, notify, patrol, led, still, under, development, knowing, password, properly, restricted, level, changing, assessing, consider, 1000, working, easily, complicated, manage, place, site, programming, required, depends, advantages, recognizes, selecting, don, exit, informed, choice, indications, select, notified, interestingly, specify, direction, request, switching, structure, text, both, customized, through, activity, menu, their, rights, free, registration, programmed, uses, your, complex, forward, alarms, connectivity, include, bluetooth, launch, over, caller, manager, names, way, generate, starting, these, come, sensor, triggered, sending, forwarded, passes, adjust, handled, desired, separate, itfk, tfk, client, features, mode, life, condition, log, creation, editable, sounds, closure, codes, detailed, treatment, freely, configurable, adds, prefix, ip2, sound, gigabit, connector, rs232, resolution, 1280, 720, 1920, 1080, size, 256, ssd, 4gb, memory, 8gb, 64bit, run, suitable, speed, performance, selected, processor, cpu, mark, should, least, 3000, preferably, above, 6000, https, cpubenchmark, net, cpu_list, php, configuration, later, technical, various, previously, assistance, measures, minimizes, task, transparent, helps, take, base, identifiers, modified, thus, centers, communicators, same, account, identified, assigned, objects, radionics, d6600, reporting, configured, per, those, wait, communicate, handles, solved, multiple, operators, offer, tasks, executive, personnel, optimized, clear, clean, target, fixed, developed, purpose, visually, displays, continuously, arriving, large, checked, anywhere, clicking, lte, pair, wires, availability, costs, encryption, comply, domestic, international, standards, whatever, encoding, offered, side, sends, began, basis, modern, suppose, unavailable, substitute, creates, then, issued, method, signaling, contactid, internationally, standardized, methods, most, common, here, find, out, areas, zones, transferable, distinguish, tip, ring, understand, integrated, transfer, recevier, secure, reaches, receives, processes, electronic, applications, independent, located, serious, larger, values, arrive, qualified, takes, arranged, steps, protect, buildings, solar, panels, word, become, well, paced, documents, carrying, office, opportunity, immediately, business, holiday, wine, cellar, either, reasons, just, because, let, courier, who, brings, package, called, own, lives, distant, valuables, hours, day, mean, details, question, station, language, shop, systems,

Text of the page (random words):
endent monitoring of our remotely located equipment in the case of more serious larger values the given signals arrive in a remote monitoring receiver where a qualified security service takes the necessary pre arranged steps to protect our devices buildings or even our solar panels notification process with the transmitter s help after secure coding according to a standard the signal reaches a receiver unit via the communication channel which receives the received signal the remote monitoring software is connected to this receiver unit which processes the incoming test and alarm events device transmitter communication channel recevier software observed device what device can we monitor and how can we transfer the information to the transmitting device integrated it has a built in communicator there is no need for a transmitter if our device can connect to an ip ethernet wifi or gsm network and send a signal using a protocol that the remote monitoring receiver can understand tip ring line via line input our equipment is capable of receiving an analogue telephone line pstn output pgm with output control our device has a contact output relay or oc which can control the input of another device transmitter using the specified output in the event of an event we can distinguish as many events as our device has outputs and as many inputs as the transmitter device transferable protocol the internationally standardized signal transmission methods known in asset protection can be used the most common protocols are contact id and sia dc here you can find out about the status changes of all areas zones and devices in the case of contact control the standard protocol is provided by the transmitting device in this case the protocol is specified in the communicator contactid types of receiving incoming signal method of receiving events from the signaling device line input pstn in security technology this type began to be used for alarm devices which is the basis of today s modern signalling devices suppose an analogue telephone line pstn is unavailable in that case a line substitute creates the line by connecting a gsm or ip module with the help of which we can receive and then transmit the signals issued by the alarm center or device contact controlled input with the contact given to the input of the transmitter thanks to which the transmitter sends the contact id sia dc signal device transmitter communication channel go to the products transmitter protocol types according to signal transmission coding we can choose the signal s encryption contact id sia dc all devices comply with domestic and international standards which means that whatever encoding we choose from the options offered by the transmitter the device on the receiving side will decode and transmit it types of communication channels when the transmitter has received the signal from our device we can choose from different communication channels in terms of availability and costs telephone line on a physical pair of wires via analogue telephone line voice call via ip ethernet or wifi network data connection gsm network voice message with call sms gprs 4g data connection what kind of signal can the receiver handle depending on the type of receiver the device can receive signals from the communication channel which can be pstn line signals voice call this can also be a voice call via the gsm network ip data transmission signals via internet connection gprs lte data transmission signals via internet connection transmitter communication channel receiver physical software cloud go to the products receiver how does the receiver display the received signals the receiver is usually a server target hardware or pc software connected to a telephone line or a fixed ip address capable of receiving the protocol via the communication channel on the servers developed for this purpose in addition to the web display enigma ii it visually displays the continuously arriving signals on a large display in the case of a receiver without a display the received signals can be checked from anywhere by clicking on a local or remote web address with an individually set contact open web port software ip server with pc monitoring software ip servers use software to display incoming information as a monitoring software alarm commander can receive and decode asset protection and fire alarm events from multiple digital receivers help operators process them and offer immediate action tasks to executive security personnel based on pre recorded data it provides an optimized clear and clean user interface for fast and efficient use go to the products connecting alarm commander software to digital receivers serial port digital receivers connect via rs 232 serial port or usb virtual com ports using sur gard mlr2 or sia dc 07 protocols up to 15 receivers can be connected simultaneously the program searches for available connection ports detects connected receivers between 9600 and 57600 baud rates and automatically offers them for connection ip connection digital receivers connect via rs 232 serial port or usb virtual com ports using sur gard mlr2 or sia dc 07 protocols up to 15 receivers can be connected simultaneously the program searches for available connection ports detects connected receivers between 9600 and 57600 baud rates and automatically offers them for connection ip server in case of direct ip reception as an optional option the alarm commander software can also receive events directly from the e2 or based on sia dc 09 ip event reporting protocols up to 15 different server ports can be configured per ip address the operation of the ip receiver receiver setting in alarm commander must be used with those receivers that wait for the connection to the monitoring program as a server e g enigma in such cases sur gard and sia can communicate via dc 07 protocols if the receiver handles the ip based sia dc 07 protocol so that the monitoring program must be the server it can be solved with the ip server function of alarm commander the object identifiers can be expanded and modified for all receivers and signal reception thus centers communicators available on a remote network can also use the same account id accordingly receivers can be identified and assigned to different objects in addition to the enigma receiver the alarm commander is also compatible with sur gard and radionics d6600 receivers software alarm commander base alarm commander is a remote monitoring program that can process messages received by various digital receivers and based on the previously recorded data provide the operator with assistance for possible measures based on pre set parameters it minimizes the operator s task and thanks to the transparent simple interface and handling it helps to take quick and efficient action technical data operating system windows 10 or later recommended pc configuration to run ms windows 10 at a suitable speed it is recommended to check the performance of the selected processor at https www cpubenchmark net cpu_list php and based on this the cpu mark value should be at least 3000 but preferably above 6000 4gb memory but 8gb is recommended for windows 10 64bit 256 gb ssd for monitor resolution min 1280 720 but 1920 1080 or more is recommended in terms of size min 23 24 depending on use rs232 port for communication with digital receivers sound card gigabit ethernet connector remote monitoring software receiver connection via serial port automatic search 1 pc max 15 connecting a receiver via ip enigma ii and ip2 automatic search 1 pc max 15 direct ip message reception without receiver e2 and sia dc 09 protocol management optional max 15 identification changes depending on the reception point adds the identifier of the incoming message with a prefix specified for a reception point freely configurable interface simple and quick treatment detailed object data individual and identifier codes action management with automatic closure depending on the event custom editable sounds automatic log creation condition monitoring automatic test and life signal monitoring service test mode safety features in handling and operation network server client option optional itfk interface program for the server of the fire alarm center tfk optional sms notification requires a separate device optional email notification optional signal display setting ascloudmanager com cloud it passes the signals sent by our device to the transmitter where we can adjust the transmitter according to our needs the incoming signals can be handled as desired on the website www ascloudmanager com go to the webpage contact id messages the cid signals of the centre sending the signal can be forwarded via email and or push messages to one or more email addresses and or mobile phone numbers specified by us messages triggered by an input state change by starting an incoming contact we can send a signal as an e mail and or push message to one or more e mail addresses and or mobile phone numbers provided by us these signals can come directly from the pgm outputs of the alarm center but even a sensor with external contact control can be perfect we can also use gsm gprs 2g 4g based modules to send input status change signals and set sms messages with unique names in this way we can generate an immediate signal remote control process it is only sometimes enough to receive a signal notification we may want to intervene acknowledge or if appropriate activate another device after the signal in many cases the transmitting device also has outputs that can be controlled remotely depending on the installation we can even remotely turn on off our equipment in this case we can give a signal contact to the input of our device via the transmitter s output remote control interface options cloud manager application from the ascloudmanager website voice call with or without caller id sms command from alarm commander software what are the benefits of the application it is only sometimes enough to receive a signal notification we may want to intervene acknowledge or if appropriate activate another device after the signal in many cases the transmitting device also has outputs that can be controlled remotely depending on the installation we can even remotely turn on off our equipment in this case we can give a signal contact to the input of our device via the transmitter s output what are the benefits of the application control with a quick launch icon depending on the setting even from all over the world setting output control time depending on the module monostable bistable on and off output settings depending on the module connectivity options include bluetooth sim or cloud you can create an unlimited number of users for each device separately by entering the users email addresses control of electric gates barriers alarms controls and other contact controlled devices the device output control is simple and can be set with the application there is no need to configure complex network settings e g port forward the application control uses a data connection on your mobile device with the help of which the registered modules can be accessed the module must have a data connection in the case of a sim card or an ethernet wifi connection which can be used to connect to the internet ascloudmanager com website remote control the website can be used after free registration with which depending on the module we can remotely access the settings of our registered device or devices and control our programmed outputs directly on the website or with the help of a pc desktop quick start icon through the website we receive additional information about the modules output input state status that provides the signal of the users activity if we use such a function but we can also test the device directly via the web in the menu you can create unlimited users by entering their email addresses and setting up individual rights we can create status notifications via a website notification of local signals we can select an output or input depending on which change we want notified of interestingly we can specify the direction of the output change which means that we can request a notification for switching the output on and off if the user requires it we provide a notification email address or mobile access to the push message the structure and text of both messages can be customized individually notification of panel indications the signalling module recognizes the cid code sent by the alarm centre and by selecting the appropriate one we can give the module a notification command if you don t need a remote monitoring service with an exit and want to be informed about the set signal this function is the perfect choice go to the webpage what are the advantages of web access no on site programming is required depends on transmitter type manage module settings in one place custom cid code notifications setting depending on module type direct output control with a desktop quick start icon management of control phone numbers depending on the module type management of control phone numbers depending on the module type setting output control time depending on the module monostable bistable on and off output settings you can create an unlimited number of users for each device separately by entering the users email addresses direct control of electric gates barriers and other contact controlled devices the operating parameters of the module can be set easily there is no need to configure complicated network settings for web access and control the module must have a working data connection or an ethernet connection with the help of which the registered modules can be accessed voice call remote control control by voice call is possible for the module with a gsm connection when assessing our needs we must consider the number of users and choose a module for output control accordingly modules are available with number identification from 1 to 1000 users but unlimited users can use the control without number identification sms command remote control sms output control can be used for a gsm module using a sim card the output can be controlled by knowing the security password of the properly set sim card and the built in module in this case user access is not restricted we can increase the level of protection by changing the security code alarm commander remote control in the software it will be possible to notify a patrol led by the remote monitoring security service in the event of an alarm which is still under development types of outputs the outputs also vary depending on the type of signal providing transmitting modules which can be monostabile it controls the output for the set time usually given in seconds contact output bistabile a state change occurs with the output control the output will be switched until it is controlled again contact output oc output in the case of an open collector o c output a...