If you are not sure if the website you would like to visit is secure, you can verify it here. Enter the website address of the page and see parts of its content and the thumbnail images on this site. None (if any) dangerous scripts on the referenced page will be executed. Additionally, if the selected site contains subpages, you can verify it (review) in batches containing 5 pages.

#deposition

HashTag: #deposition was found on 1 verified websites, here is a list (max 10) of them:

#deposition on scite.ai/reports/ultrahigh-vacuum-dc-magnetron-spu...

site addressscite.ai/reports/ultrahigh-vacuum-dc-magnetron-sputter-deposition-QeVJM4V
site titleUltrahigh vacuum dc magnetron sputter-deposition of epitaxial Pd(111)/Al2O3(0001) thin films
status of last verificationGREEN status (no comments) - no comments
site size & charset34563; utf-8;
meta descriptionSupporting: 1, Mentioning: 16 - Pd(111) thin films, ∼245 nm thick, are deposited on AlO(0001) substrates at ≈0.5, where is the Pd melting point, by ultrahigh vacuum dc magnetron sputtering of Pd target in pure Ar discharges. Auger electron spectra and low-energy electron diffraction patterns acquired from the as-deposited samples reveal that the surfaces are compositionally pure 111-oriented Pd. Double-axis x-ray diffraction (XRD) ω-2θ scans show only the set of Pd 111 peaks from the film. In triple-axis high-resolution XRD, the full width at half maximum intensity Γ of the Pd 111 ω-rocking curve is 630 arc sec. XRD 111 pole figure obtained from the sample revealed six peaks 60°-apart at a tilt angles corresponding to Pd 111 reflections. XRD ϕ scans show six 60°-rotated 111 peaks of Pd at the same ϕ angles for 11[Formula: see text]3 of AlO based on which the epitaxial crystallographic relationships between the film and the substrate are determined as [Formula: see text]ǁ[Formula: see text] with two in-plane orientations of [Formula: see text]ǁ[Formula: see text] and [Formula: see text]ǁ[Formula: see text]. Using triple axis symmetric and asymmetric reciprocal space maps, interplanar spacings of out-of-plane (111) and in-plane (11[Formula: see text]) are found to be 0.2242 ± 0.0003 and 0.1591 ± 0.0003 nm, respectively. These values are 0.18% lower than 0.2246 nm for (111) and the same, within the measurement uncertainties, as 0.1588 nm for (11[Formula: see text]) calculated from the bulk Pd lattice parameter, suggesting a small out-of-plane compressive strain and an in-plane tensile strain related to the thermal strain upon cooling the sample from the deposition temperature to room temperature. High-resolution cross-sectional transmission electron microscopy coupled with energy dispersive x-ray spectra obtained from the Pd(111)/AlO(0001) samples indicate that the Pd-AlO interfaces are essentially atomically abrupt and dislocation-free. These results demonstrate the growth of epitaxial Pd thin films with (111) out-of-plane orientation with low mosaicity on AlO(0001).
meta keywords
hashtags
website verified
15 days agoVerify Now
Top 50 hastags from of all verified websites.